TOYOTA COROLLA GT AE 86 SPECIAL PARTS AND PART MODIFICATIONS
MAKE AN ORDER
Write the order on our ordering form on the Contact Us -page.
If you don´t find what you were looking for, please be still free to ask it from us!
Email inquiries:
esa.peltonen@windowslive.com
All prices without taxes and duties, ExWorks, Iittala, Finland.
All above parts are for tuning and racing purposes and so these parts do not have any warranty.
shipping costs depend on the product.
| Tuote | Määrä | Hinta |
|---|---|---|
| ENGINE 4AGE | VAT 0% | |
| CYLINDER BLOCK PARTS | ||
| Wiseco pistons Bore 81.20mm Comp.Ht 25.4mm Pin 18mm | 1 set | 930,00€ |
| Wiseco pistons Bore 81.25mm Comp.Ht 24.56mm Pin 18mm | 1 set | 930,00€ |
| Wiseco pistons Bore 81.28mm Comp.Ht 25.4mm Pin 18mm | 1 set | 930,00€ |
| Wiseco pistons Bore 81.30mmm Comp.Ht 24.56mm Pin 18mm | 1 set | 930,00€ |
| Wiseco pistons Bore 83.00mm Comp.Ht 24.56mm Pin 18mm | 1 set | 930,00e |
| Piston ring set for one piston | 1 set | 29,00€ |
| Piston Pin | 1 pc | 29,00€ |
| piston pin circlip | 1 pc | 1,90€ |
| Connection rods (special steel, machined ) | 1 set | 475,00€ |
| Lifters(tappet) hard, | 1 pc | 39,00€ |
| Lash Cap ( various sizes) | 1 pc | 7,50€ |
| BEARINGS | VAT 0% | |
| Crankshaft thrust bearings | 1 set | 22,00€ |
| Racing Crankshaft main bearing shells | 1 set | 64,00 |
| Racing Connection rod big-end bearings | 1 set | 57,00€ |
| CAMSHAFT DRIVE PARTS | VAT 0% | |
| Cam pulleys adjustable | pair | 110,00€ |
| Camshafts (cast iron) | pair | 545,00€ |
| duration | maximum lift | lift at TDC | parts | application | |
|---|---|---|---|---|---|
| [0.1mm+cl] | [1.0mm+cl] | [cl=0] | [cl=0] | [-] | (TURBO) |
| 252/244° | 222/214° | 8,5/8,00mm | 1,25/0,90mm | O.E.M. | MECH:sport |
| 260/252° | 230/222° | 9,00/8,50mm | 1,65/1,25mm | O.E.M. | MECH:sport |
| 266/260° | 238/230° | 9,50/9,00mm | 2,25/1,85mm | custom | MECH:rally & cross |
| 268/260° | 238/230° | 10,70/10,25mm | 2,45/2,00mm | custom | MECH:rally & cross |
| 275/267° | 246/238° | 10,00/9,50mm | 2,65/2,25mm | custom | MECH:rally & cross |
| 278 / 268° | 246 / 238° | 11.15 / 10.70mm | 2.95 / 2.45mm | custom | MECH:rally & cross |
| 282 / 267° | 254 / 238° | 10.50 / 9.50mm | 3.25 / 1.45mm | custom | MECH:rally & cross |
| 282 / 275° | 254 / 246° | 10.50 / 10.00mm | 3.25 / 2.85mm | custom | MECH:rally & race |
| 291/285° | 262 / 254° | 11.00 / 10.50mm | 3.65 / 3.25mm | custom | MECH:rally & race |
| 287 / 278° | 256 / 246° | 11.65 / 11.15mm | 3.65 / 3.15mm | custom | MECH:rally & race |
| 294 / 287° | 262 / 256° | 12.05 / 11.65mm | 4.30 / 3.85mm | custom | MECH:rally & race |
| Billet camshafts | pair | 715,00€ |
| CYLINDER HEAD PARTS | (VAT 0%) | |
| Intake valve, stainless steel | 1 pc | 16,00€ |
| Exhaust valve, stainless steel | 1 pc | 32,00€ |
| Racing retainer | 1 pc | 9,90€ |
| Single racing valve spring | 1 pc | 9,90€ |
| ARP Cylinder head bolts | 1 set | 175,00€ |
| GASKETS | (VAT 0%) | |
| OEM Gasket set complete 4Age (WITHOUT CYLHEAD GASKET) | 1 pc | 265,00€ |
| Cometic cylinder head gasket 4age 82mm = 0,76mm and 1,01mm | ||
| 83mm= 0,76mm , 1,01mm | 1pc | 115,00 - 125,00€ |
| INTAKE MANIFOLDS / EXHAUS MANIFOLDS | (VAT 0%) | |
| Martelius R1 exhaust manifold | 1 pc | 523,00€ |
| Martelius exhaust manifold Gr.A CAT. material RST | 1 pc | 595,00€ |
| CLUTCH PARTS | (VAT 0%) | |
| Clutch housing A engine/T gearbox | 1 | 315,00€ |
| clutch plate, 4 arm, with sintered Friction linings, various sizes | 1pc | 139,00€ |
| ARP flywheel bolts | 1 set | 38,80€ |
| SUSPENSION, BRAKES, STEERING AND TRANSMISSION | (VAT 0%) | |
| Lampola - gearbox, 5speed, dogbox (without syncroniser for fast gear shift, without need to use clutch) (will be made to your GT Corolla T-50 Gearbox) | 1pc | 2830,00€ |
| Cardan axle bracket bearing | 1pc | 48,00€ |
| Corolla AE86 Steel Driveshaft | 1pc | 540,00€ |
| STEERING | (VAT 0%) | |
| Rack and pinion for 1,8 or 2,4 revolutions from end to end. LHD and RHD | 1 pc | 380,00€ |
| BRAKES | (VAT 0%) | |
| Wilwood Dynalite calipers, 4-pistons, aluminium max. disc thickness 22.5mm. Disc diameter 230mm - 380mm | 1 pc | 259,00€ |
| Wilwood Dynapro calipers, 2-pistons aluminium max. disc thickness 12.00mm | 1 pc | 223,00€ |
| Wilwood superlite calipers max. disc thickness 24mm | 1 pc | 265,00€ |
| Ferodo disc pads for Wilwood calibers | 1 pc | 114,00€ |
| Hydraulic handbrake control lever, vertical | 1 pc | 159,00€ |
| BILSTEIN SUSPENSION PARTS / SHOCK ABSORBERS | (VAT 0%) | |
| Complete Mc Pherson unit assembled | 1 pc | 575,00€ |
| Bilstein 40mm shock absorber cartridge | 1 pc | 242,00€ |
| OTHER SUSPENSION PARTS | (VAT 0%) | |
| Stud bolts for wheel hub, M12x1,5 length 50mm / 63mm to be mounted in 13mm or 14mm bore, 4pcs set | 1 set | 17,00€ |
| AE86 original Toyota wheel hub | 1 pc | 205,00€ |
| Final drive 5.13 | 1 pc | 750,00€ |
| bearing set, solid spacer kit, pinion seal, pinion nut, pinion depth shim kit | 1 set | 278,00€ |
| Final drive 5,85 in stock | 1 pc | 619,00€ |
