Toyota Starlet Racing parts
MAKE AN ORDER
Write the order on our ordering form on the Contact Us -page.
If you don´t find what you were looking for, please be still free to ask it from us!
Email inquiries:
esa.peltonen@windowslive.com
All prices without taxes and duties, ExWorks, Iittala, Finland.
All above parts are for tuning and racing purposes and so these parts do not have any warranty.
shipping costs depend on the product.
Product | Qty | Price (VAT 0%) |
---|---|---|
ENGINE | ||
Complete Engine (model picture) | 1 pc | ASK |
CYLINDER BLOCK PARTS | ||
Wiseco pistons 78mm Flat top Comp.height 25.4mm | 1 set | 629,00€ |
Special light pistons 78mm 317gr with pin and rings Model E.Peltonen | 1 set | |
Wiseco pistons 79mm flat top Comp.height 25.4mm | 1 set | 629,00€ |
Wiseco pistons 82mm flat top Comp.height 25.4mm | 1 set | 629,00€ |
Wiseco pistons 83mm flat top Comp.height 25.4mm | 1 set | 629,00€ |
Wiseco pistons 83mm with 7ml combustion chamber Comp.height 25.4mm | 1 set | 695,00€ |
Wiseco pistons 83.5mm Comp.height 25.4mm | 1 set | 629,00€ |
Special light pistons 83.5mm | 1 set | 629,00€ |
NEW! 75,30mm, for Historic racing,Special E. Peltonen Model (for original conrod) Comp.height 36.3mm | 1 set | 685,00€ |
NEW ! Wiseco 79mm 3K/4K fit orig conrods | 1 set | 685,00€ |
Piston ring set for one piston | 1 set | 31,00€ |
Wiseco piston Pin, strong | 1 pc | 29,00€ |
Wiseco piston pin | 1 pc | 16,00€ |
piston pin circlip | 1 pc | 1,90€ |
4K / 5K PO connecting rods (special steel, machined) lenght 131mm | 1 set | 855,00€ |
7K PO connecting rods (special steel, machined) with 7K Wiseco pistons 83mm | 1 set | 1479,00€ |
NEW! 7K connection rods 536gr (lenght 141,4mm, 20mm pin) made for SR20DE race bearings | 1 set | 425,00€ |
4/5K Connection rods (special steel, machined ) lenght 131mm | 1 set | 425,00€ |
4K / 5K Billet steel crankshaft | 1 pc | 1180,00€ |
ARP bolts for PO connecting rods (8 pcs) | 1 set | 94,00€ |
Strengthening plate for main bearing cap (The original bearing cap reguire modification) 5pcs | 1 set | 98,00€ |
4-5K Oil pump | 1 pc | 198,00€ |
7K Oil pump | 1 pc | 198,00€ |
7K Oil pump strainer | 1 pc | 67,00€ |
4-5K Oil pump aftermarket | 1 pc | 105,00€ |
Pushrod lifters(tappet) hard, 5K 8pcs | 1 set | 249,00€ |
Pushrods 186mm | 1 set | 99,00€ |
Pushrods 189mm | 1 set | 109,00€ |
Pushrods, tailor made for required size | 1 set | 129,00€ |
BEARINGS | (VAT 0%) | |
Crankshaft thrust bearings 2K.3K.4K,5K,7K | 1 set | 14,00€ |
Crankshaft main bearing shells STD 2K.3K.4K,5K,7K | 1 set | 37,00€ |
Crankshaft main bearing shells -0.50mm 2K.3K.4K,5K,7K | 1 set | 62,00€ |
Connection rod big-end bearings 2K.3K.4K,5K | 1 set | 37,00€ |
Connection rod big-end bearings -0.25mm 2K.3K.4K,5K | 1 set | 59,00€ |
ACL race connection rod bearing 4AGE | 1 set | 75,00€ |
Camshaft bearings 2K.3K.4K,5K,7K | 1 set | 65,00€ |
7K Connection rod big-end bearings | 1 set | 129,00€ |
Camshaft Drive Parts | (VAT 0%) | |
Sprocket wheel camshaft end, adjustable (2-line 2K.3K.4K,5K,7K) | 1 pc | 136,00€ |
Sprocket wheel crankshaft end,(2-line) original 2K.3K.4K,5K,7K | 1 pc | 59,50€ |
Sprocket wheel crankshaft end, (2-line) (after market) 2K.3K.4K,5K,7K | 1 pc | 29,00€ |
Timing chain, (2-line) original. 2K.3K.4K,5K,7K | 1 pc | 68,00€ |
Timing chain guide (2-line) 2K.3K.4K,5K,7K | 1 pc | 29,00€ |
Timing chain tensioner (2-line) 2K.3K.4K,5K,7K | 1 pc | 36,50€ |
Camshaft 315 degrees 300 degrees 305/310 degrees for roller rocker 280 degrees for street use | 1 pc | 245,00€ |
CYLINDER HEAD | (VAT 0%) | |
Racing cylinder head complete with valves and springs assembled. (will be made to your 3K cylinder head, if not 240€ extra ) | 1 pc | 1590,00€ |
Rocker shaft | 1 pc | 63,00€ |
Inlet valve 40mm 7mm Stem, shaped | 1 pc | 24,00€ |
Exhaust valve 32mm 7mm Stem, shaped | 1 pc | 32,00€ |
Valve bronze guide, shaped for 8 valves | 1 set | 140,00€ |
Retainers/locks (7mm Stem) for 8 valves | 1 set | 84,00€ |
Inner and outer valve springs for 8 valves | 1 set | 129,00€ |
Cylinder head bolts, extra strong | 1 set | 39,00€ |
Washer for cyl.head bolt | 1 pc | 1,90€ |
GASKETS | (VAT 0%) | |
Gasket set for 4K/5K engine complete | 1 pc | 52,80€ |
Gasket set for 7K engine complete | 1 pc | 55,00€ |
Cylinder head gasket 7K (original) | 1 pc | 88,00€ |
Cylinder head gasket 5k (original) | 1 pc | 42,00€ |
Cylinder head gasket 4k (original) | 1 pc | 42,00€ |
Cylinder head gasket 5K (AJUSA) | 1 pc | 24,50€ |
Intake/exhaust manifold gasket (Combined and reinforced) | 1 pc | 28,00€ |
INTAKE MANIFOLDS / EXHAUS MANIFOLDS | (VAT 0%) | |
Billet CNC machined vertical Intake manifold. In Stock ! | 1 pc | 579,00€ |
Martelius XL-exhaust manifold 4-2-1 (38-41,5-51mm) | 1 pc | 379,00€ |
Martelius exhaust manifold 4-2-1 (38-38-51mm) | 1 pc | 379,00€ |
Starlet 2" DIY half ready exhaust pipe | 1 pc | 198,00€ |
BELT PULLEY | (VAT 0%) | |
Crankshaft belt pulley, Alu7075 | 1 pc | 82,00€ |
Waterpump belt pulley Alu6082 | 1 pc | 82,00€ |
Alternator belt pulley Alu6082 | 1 pc | 45,00€ |
Crankshaft ,waterpump and alternator belt pulley set aluminium | 1 set | 199,00€ |
Crank Trigger shells | 1 pc | 35,00€ |
OTHER PARTS / PRODUCTS | (VAT 0%) | |
New! 4K Carburetor | 1 pc | 99,00€ |
Electronic distributor for K engines | 1 pc | 108,00€ |
Ignition coil for this distributor | 1 pc | 29,00€ |
Waterpump | 1 pc | 33,00€ |
Oil cooler | 1 pc | 92,00€ |
Oil cooler adapter to cylinder block | 1 pc | 74,00€ |
Oil filter separate mounting bracket, 1/2 inch | 1 pc | 43,00€ |
Electronic Ignition + Power Coil | 1 pc | 229,00€ |
Accelerator cable starlet 79-82 | 1 pc | 44,00€ |
Accelerator cable starlet 83-84 | 44,00€ | |
CLUTCH PARTS | (VAT 0%) | |
clutch plate, 3 arm, with sintered Friction linings, various sizes | 1 pc | 129,00€ |
Flywheel bolts, 6pcs | 1 set | 18,00€ |
Steel flywheel and AP clutch cover (with clutch plate) use an original starter ring | 1 set | 978,00€ |
Standart clutch cover, plate and bearing | 1 pc | 90,00€ |
Sachs clutch cover. Fit original flywheel. 20% stiffer than original. Need to adjust clutch cover height to flywheel. | 1 pc | 310,00€ |
NEW! Clutch cable | 1 pc | 69,00€ |
SUSPENSION, BRAKES, STEERING AND TRANSMISSION | (VAT 0%) | |
Clutch housing for K-engines to T series gearboxes | 1 pc | 309,00€ |
Lampola K-50 historic gearbox (will be made to your K-50 Gearbox) | 1 pc | 1900,00€ |
Lampola - gearbox, 5speed, dogbox (without syncroniser for fast gear shift, without need to use clutch) (will be made to your GT Corolla T-50 Gearbox) | 1 pc | 2590,00€ |
Driveshaft bracket bearing for toyota AE86 etc. | 1 pc | 69,00€ |
T-50 Driveshaft Yoke. 22spline with 26mm Ujoint. | 1 set | 160,00€ |
Steering LHD Rack and pinion for 1,8 or 2,25 revolutions from end to end | 1 pc | 340,00€ |
Steering RHD Rack and pinion for 1,8 or 2,25 revolutions from end to end | 1 pc | 350,00€ |
SPRINGS | (VAT 0%) | |
Main and additional springs, 57mm inside diameter, various lenghts and spring rates available | 1 pc | 60,00€ |
Main and additional spring for starlet, 65mm inside diameter,various lenghts and spring rates available | 1 pc | 70,00€ |
Control Arms Price without tax Rear trailing arms, uniball end bearing, 4pcs, (Classification for historic starlet) | 1 set | 345,00€ |
Rear trailing arms, uniball end bearing and PU Bush, 4pcs | 1 set | 345,00€ |
Rear trailing arms with PU Bush for both ends, 4pcs | 1 set | 270,00€ |
Standart front control arm | 1 pc | 55,00€ |
BRAKES | (VAT 0%) | |
Wilwood Dynalite calipers, 4-pistons, aluminium max. disc thickness 22.5mm. Disc diameter 230mm - 380mm | 1 pc | 150,00€ |
Wilwood Dynapro calipers, 2-pistons aluminium max. disc thickness 12.00mm | 1 pc | 122,00€ |
Wilwood superlite calipers max. disc thickness 24mm | 1 pc | 199,00€ |
Ferodo disc pads for Wilwood calibers | 1 set | 80,00€ |
Ferodo Brakepads for starlet original calipers DS 2500 | 1 set | 150,00€ |
Ferodo Brakepads for starlet original DS3000(R) | 1 set | 165,00€ |
Brake disc (original size) | 1 pc | 39,00€ |
Hydraulic handbrake control lever, vertical | 1 pc | 59,00€ |
BILSTEIN SUSPENSION PARTS / SHOCK ABSORBERS | (VAT 0%) | |
40mm Bilstein front shock absorder cartridge kit, including outside tube DIY McPherson unit building (see photo for detailed content) | 1 pc | 480,00€ |
Complete Mc Pherson unit assembled for your own Mc Pherson unit | 1 pc | 630,00€ |
Bilstein 40mm shock absorber cartridge | 1 pc | 265,00€ |
Bilstein rear shock absorber B-46-0918 | 1 pc | 132,00€ |
OTHER SUSPENSION PARTS | (VAT 0%) | |
Front suspension upper end support set, includes: mounting plate (for camper adjusting) to be welded in to chassis, strut upper end, uniball bearing, circlip (1 set incl. both sides) | 1 set | 195,00€ |
Original new Gt Corolla AE 86 hub | 1 pc | 159,00€ |
Starlet antiroll bar bush kit | 1 set | 63,00€ |
FINAL DRIVE | (VAT 0%) | |
Final drive set, pinion and gear wheel, 6" 4,78 ratio, suitable for original starlet rear axle, allowed for historic races | 1 pc | 690,00€ |
6 inch LSD for Starlet/Ke30/Ke70 Corolla (40/65) very high quality | 1 pc | 970,00€ |
5,6 and 6 inch Pinion Small bearing | 1 pc | 48,00€ |
5.6 and 6 inch pinion big bearing | 1 pc | 48,00€ |
5.6 and 6 inch Crown wheel bearing | 1 pc | 48,00€ |
Ford Escort "english" LSD 22 spline QP 40/65, 120nm preload very high quality | 1 pc | 980,00€ |
CHASSIS | (VAT 0%) | |
Fender side indicator | 1 pc | 28,00€ |
Wider wheel arc (+70mm) for front/rear fender, fiberglass, 4pcs set | 1 set | 82,00€ |
TRD model fiberglass wideners | 1 set | 475,00€ |
Starlet model 78-80 Fiberglass bonnet | 1 | 160,00€ |
Starlet model 81-82 Fiberglass bonnet | 1 | 160,00€ |
Starlet model 78-80 fiberglass fender right / left | 1 | 125,00€ |
Starlet model 81-82 fiberglass fender right/ left | 1 | 125,00€ |
Fiberglass boot lid | 1 | 150,00€ |
Fiberglass boot lid 83-84 | 1 | 150,00€ |
Fiberglass Bumber/spoiler | 1 | 150,00€ |
Rear spoiler | 1 | 81,00€ |